Main Contents begins from here.

Support

DMC-FS15 Firmware update service

About downloading service

Dear Customers,
We would like to thank you for purchasing Panasonic DMC-FS15.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

[ Warning ]
For our customers safety, after this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.
(Currently there is no authorised 3rd party battery available in the market.)

Update Contents

Model Number DMC-FS15
Update Version Ver 1.3
Update File Name/
Size

For Windows:
FS15_V13.exe / 6,558,407 bytes (After self-extract, FS15_130.bin)

For Macintosh:
FS15_V13.zip / 6,490,311 bytes (After self-extract, FS15_130.bin)
Update Date 2009/6/15

Improvements

Date/Version Description
2009/6/15
Ver 1.3
  • Improvement of battery detection for safety standards Panasonic uses.
    (After this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.)
2009/4/20
Ver 1.2
  • Improved image quality
2009/2/26
Ver 1.1
  • Performance improvement at the time of the slide show enforcement

Firmware Update Procedures (Overview)

  • STEP 1. Check the current version of firmware used by your camera.
  • STEP 2. Download an updated version of the firmware and double click the downloaded file to decompress it.
  • STEP 3. Copy the firmware file onto an SD Memory Card.
  • STEP 4. Install the firmware update.
Caution:
  • Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera's firmware.
    Doing so can cause serious damage to your camera.
  • If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.

Actual installation steps

STEP 1: Reading the current firmware version.
  Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:
  If the firmware version indicated is older than the version being offered, please update firmware.
The firmware update is not necessary if the current firmware version on your camera is Version 1.2.
     
 

1.Turn the camera on.

  • A:[MENU/SET] button
  • B:[REC]/[PLAYBECK] selector switch
  • C:[Mode] button

2.Slide the [REC]/[PLAYBACK] selector switch to []

3.Press [MODE] button.
     
 

4.Press [/] to select [NORMAL PICTURE], and then press [MENU/SET].
     
 

5.Press [MENU/SET] to display yhe menu.

  • You can switch menu screens from any menu item by rotating the zoom lever.
     
  6.Press [] , and then press [] to select the [SETUP] menu icon []
     
  7.[][VERSION DISP.]
  • It is possible to check which version of firmware is on the camera.
     

[ Warning ]
For our customers safety, after this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.
(Currently there is no authorised 3rd party battery available in the market.)

Please choose the button after reading [ Warning ] sentence.

Footer navigation area begins from here.